Download RockChip Multiport FactoryTool Latest Version:
Download Link:
Key Capabilities of RockChip Multiport FactoryTool:
Firmware Flashing:
The primary purpose of the tool is to carry out firmware flashing on Rockchip devices, addressing and resolving any software-related issues that may be present.
Device Detection:
The program excels in automatically detecting Rockchip devices when they are in download mode, streamlining the connection process for efficient firmware management.
Simple Interface:
Featuring a user-friendly interface, the tool ensures a straightforward and hassle-free experience for users looking to flash their devices. This simplicity enhances the ease of firmware installation and upgrades.
How To Use RockChip Multiport FactoryTool?
Download & Extract Program:
Obtain the latest version of the program from the provided links and extract the downloaded file.
Run FactoryTool.exe:
Navigate to the directory where you extracted RockChip Multiport FactoryTool and launch FactoryTool.exe.
Click Top 'Firmware' Button:
Inside the RockChip Multiport FactoryTool, click on the "Firmware" option located at the top of the window.
Browse Factory Firmware .img of Your Device:
In the firmware selector, locate and choose the factory firmware file for your device, typically in .img or .bin format.
Plug the Device by Pressing the Volume Up/Down Button:
Power off your Rockchip device.
While keeping the device turned off, connect it to your computer using a USB cable while holding down the volume up and down buttons.
Click 'RUN' Button:
Once the program identifies the connected device, click the 'Run' button to initiate the flashing process.
Wait for Flashing to Complete:
Allow the tool to complete the flashing process. Exercise patience during this phase.
Unplug and Start Device:
Once the flashing is successfully completed, disconnect the device from the computer.
Power on your device to start using the newly flashed firmware.
Important Points to Consider:
Initial Use, USB Port Tagging:
- Upon the first use, connect the device to a USB port, and take note of the ID displayed on the tool. Ensure to tag and record all relevant information.
Sequential Connection:
- After connecting the device, proceed to connect another device in sequence. Ensure that the connection process continues until the device completes the upgrade.
LED Indicators:
- Pay attention to LED indicators:
- Green LED: Indicates a safe state for plugging in the device.
- Red LED: Signals that plugging or unplugging the device is not advised.
Upgrade Status Indicators:
- After the upgrade process:
- Green LED: Signifies a successful upgrade.
- Red LED: Indicates a failed upgrade.
Grid Display:
- Organize the display grid to showcase successful devices on the right and failed devices on the left, providing a clear visual representation of the outcome.
0 Comments