Fixing Redmi 10c (Fog) Hang on Logo Issue Using Fastboot Mode

Resolving Hang-on Logo Issue on Redmi 10c (Fog) Using Fastboot Mode:

Fixing the Redmi 10c (Fog) Hang on Logo issue involves using Fastboot Mode. This diagnostic tool helps users update or reinstall the device's firmware. The process typically includes accessing Fastboot Mode, connecting to a computer, and flashing the firmware. Users should follow specific instructions to avoid data loss and ensure a successful resolution.

Download Link:

Link 1

Get the necessary files Redmi 10c (Fog):

Unlock Bootloader (If Necessary):
If your device's bootloader is locked, you may have to unlock it before applying the solution. Follow Xiaomi's official bootloader unlocking process, typically involving obtaining an unlock code and using the Mi Unlock Tool.

Access Fastboot Mode Redmi 10c (Fog):

• Turn off your Redmi 10c entirely. Press and hold the volume down button and the power button simultaneously until the fastboot logo appears on the screen. Connect your Redmi 10c to your computer using a USB cable while in fastboot mode. Launch the Mi Flash Tool on your computer. Select the appropriate ROM folder and ensure that the tool detects your device.

Flashing or Rewriting of the boot partition Redmi 10c (Fog):

• Locate the small file you downloaded specifically to address the hang-on-logo issue. This file is designed to flash or rewrite the boot partition. Follow the on-screen instructions in Mi Flash Tool to initiate the process. Exercise patience during the flashing process. Avoid disconnecting your device. Once completed, your Redmi 10c should automatically restart.

Verify the Fix Redmi 10c (Fog) Hang on Logo Issue:

• After the reboot, check to see if the hang-on-logo problem has been resolved. Your Redmi 10c should now start up without any issues. By following these steps and using the recommended Mi Flash Tool, you can successfully resolve the hang-on-logo problem on your Redmi 10c (Fog). Be cautious when flashing files, ensuring they are compatible with your device model at all times.

Synopsis:

The process of fixing the hang-on-logo issue on the Redmi 10c (Fog) using Fastboot Mode involves several key steps. First, it's essential to obtain the required files, ensuring they are compatible with the device model. If the bootloader is locked, unlocking it is necessary before proceeding. The next steps include entering Fastboot Mode by powering off the device and holding specific buttons simultaneously.

Once in Fastboot Mode, connecting the device to a computer and using the Mi Flash Tool becomes crucial. The tool helps in flashing or rewriting the boot partition with a specific file downloaded to address the hang-on-logo problem. During this process, patience is crucial, and it's important not to disconnect the device prematurely.